Paint additives guide: types, uses, and how to choose the right one


Release Date:

29 Sep,2026

Article overview

This guide explains what paint additives are, how each type works, which formulations suit South Africa's diverse climate zones, and how DIY users and procurement professionals can make informed purchasing decisions in 2026. Includes a dosage table, brand compatibility notes, and SANS VOC guidance.

What are paint additives and why do they matter?

Paint additives are specialised functional chemicals added in small quantities to a coating formulation to improve performance, application behaviour, storage stability, or the final film properties — without forming the main body of the coating. They are distinct from the binder, pigment, and solvent that make up the bulk of any paint system. Think of them the way a chef thinks about seasoning: the base recipe provides structure, but the seasoning determines whether the result is truly excellent.

Why does this distinction matter to a South African buyer? Because the local market presents conditions that standard off-the-shelf paints are not always optimised for. According to paint additives overview documentation, the global paint additives market was valued at approximately USD 5.4 billion in 2023 and is forecast to exceed USD 7.6 billion by 2028 — a compound annual growth rate of around 7.1%. Demand is being driven precisely by the need to tailor coatings to specific environmental and regulatory requirements, which is exactly the challenge South African contractors and DIY users face every day.

Paint performance enhancers cover an enormous range of chemistries. A roof paint additive used on a Karoo farmstead has very different requirements from an anti-rust paint additive applied to coastal steel structures in Durban. Getting the selection right from the outset saves both money and rework.

Why standard paint alone is often not enough

Coating manufacturers formulate their base products for a broad average of conditions. South Africa's climate, however, ranges from the semi-arid Highveld plateau to the subtropical humidity of KwaZulu-Natal and the wet, salty winters of the Cape Peninsula. Real-world testing consistently shows that unaided standard acrylic or PVA paints underperform in these extremes. Adding the correct coating modifiers closes that performance gap without requiring an entirely different paint system.

Who uses paint additives in South Africa?

The user base splits broadly into two groups. Professional contractors and procurement officers working on commercial or industrial projects typically source additives in bulk and blend them during manufacture or on-site. DIY users — a fast-growing segment, particularly since 2022 — buy smaller quantities from hardware retailers like Builders Warehouse or Leroy Merlin and mix them into standard retail paint. Both groups benefit from the information in this guide, though the dosage tolerances and blending instructions differ between them.

The main types of paint additives explained

There are six primary functional categories of paint additives relevant to the South African market in 2026. Each solves a specific problem, and understanding the mechanism behind each type helps you avoid costly misapplication.

Rheology modifiers and paint thickeners

Rheology modifiers — often called paint thickeners in the DIY context — control how a coating flows during application and how it behaves once the brush or roller stops moving. The most widely used class in water-based systems is hydroxyethyl cellulose (HEC). A typical interior wall paint formulation uses 0.3–0.5% HEC (medium viscosity grade) to achieve a Stormer viscosity of 95–110 KU. This gives the paint what formulators call pseudoplastic flow: viscosity drops under shear (so it spreads easily), then recovers at rest (so it does not drip). Flow improvers for paint operate on a related but distinct principle — they reduce surface tension to improve film levelling and eliminate brush marks.

Anti-mold and anti-fungal additives

In humid South African regions, mold and algae growth on exterior walls is a persistent maintenance headache. An anti-mold paint additive typically contains active biocidal compounds — isothiazolinone derivatives are the most common in 2026 — that inhibit fungal colonisation of the dried film. Anti-fungal paint treatment products designed for the in-can preservation of paint (preventing spoilage before application) use different chemistries from those that protect the cured film; buyers should confirm which function they are purchasing. Business consensus in the coatings industry is that combined in-can and dry-film protection delivers the longest service life in coastal and subtropical environments.

Waterproofing additives

Waterproofing additives work by modifying the porosity and surface energy of the cured film, reducing water ingress. They are especially relevant as paint additives for concrete — porous substrates that readily absorb rainwater, leading to efflorescence and structural carbonation. Silane- and siloxane-based compounds are the preferred chemistry for masonry applications because they penetrate the substrate rather than sitting on the surface, offering long-term hydrophobic protection even as the decorative layer weathers.

Anti-rust paint additives

Corrosion is a R-billion-per-year problem for South African industry, particularly in coastal and mining environments. Anti-rust paint additives introduce corrosion-inhibiting pigments (zinc phosphate, calcium phosphate) or active inhibitors (molybdates, tannates) into the coating matrix. Actual testing on Durban port infrastructure has demonstrated that primer coats incorporating zinc phosphate anti-rust additives at 5–8% loading can extend recoating intervals from 18 months to over 48 months under Class C3 corrosivity conditions.

Defoamers and wetting agents

Foam generated during mixing or high-speed application is one of the most common causes of surface defects in water-based paints. Defoamers — mineral oil or silicone-based — break foam bubbles before the film sets. Use them carefully: overdosing is one of the industry's most common errors, causing crater-like surface defects known as "fish-eyes." The optimal loading is usually 0.1–0.3% by weight. Wetting agents (dispersants) improve pigment dispersion and substrate adhesion, which is why they are a core component of most acrylic paint additives formulations.

Insulating and texture additives

Insulating paint additives — typically hollow ceramic microspheres — are gaining traction in South Africa's energy-constrained environment. When incorporated at 5–15% volume loading, they measurably reduce thermal conductivity through the coating layer, helping maintain interior temperatures and reduce air-conditioning load. Paint texture additives such as fine silica sand, mica flakes, or polymer beads give decorative finishes ranging from fine stipple to heavy aggregate — a popular choice for exterior wall paint additives on bushveld lodges and residential feature walls.

Choosing paint additives for South Africa's climate zones

South Africa is not one climate — it is at least four, and each demands a different additive selection strategy. This is the single most important insight that competing guides consistently miss.

Highveld plateau (Gauteng, Mpumalanga, Free State)

The Highveld is characterised by intense UV radiation, extreme temperature swings (up to 25°C between day and night in winter), and short but violent summer thunderstorms. UV stabilisers and HALS (hindered amine light stabilisers) are non-negotiable for any exterior coating here. Waterproofing additives are secondary but still recommended, particularly for flat concrete roofs. Insulating paint additives also deliver measurable energy savings given the cold, clear winters. Roof paint additives on Highveld properties should combine UV resistance with elastomeric flexibility to accommodate substrate movement from thermal cycling.

Coastal zones (Cape Town, Durban, Port Elizabeth)

Coastal environments combine salt-laden air, persistent moisture, and (in the Western Cape) strong winter rain. Anti-rust paint additives are the priority for any metal substrate. Anti-mold paint additives are equally essential for exterior walls, particularly on south-facing elevations that dry slowly. Exterior wall paint additives in these zones should be specified with enhanced water vapour permeability — trapping moisture behind an impermeable film is actually more damaging than allowing controlled breathing. Waterproofing additives should be silane-based rather than film-forming for this reason.

Semi-arid regions (Karoo, Northern Cape)

In semi-arid conditions, dust penetration, chalking from intense UV, and occasional flash flooding are the main concerns. UV-resistant coating modifiers and high-build texture additives that create a slightly rough surface (improving water runoff) perform best. Anti-mold additives are a lower priority here, but should not be omitted entirely — even arid regions experience localised damp after rain events. Paint thickeners are especially useful in these conditions because high ambient temperatures thin paint rapidly, making application consistency difficult without viscosity support.

Dosage reference: how much additive should you actually use?

One of the most persistent myths in the coatings industry is that more additive equals better performance. It does not. Most additives have a performance optimum beyond which quality deteriorates — sometimes dramatically. The table below provides 2026 reference dosage ranges for the additives most commonly used in South African applications.

Additive typeTypical dosage (% w/w)Under-dose riskOver-dose riskSouth Africa priority zone
Paint thickener (HEC MV)0.3 – 0.5%Sagging, poor coverageBrush drag, poor levellingAll zones
Anti-mold additive0.5 – 1.5%Early mold reappearanceRegulatory non-compliance, skin sensitisationCoastal, subtropical
Waterproofing additive (silane)2.0 – 5.0%Insufficient hydrophobicityAdhesion loss, whiteningCoastal, Highveld flat roofs
Anti-rust additive (zinc phosphate)5.0 – 8.0%Reduced corrosion barrierIncreased cost, slight opacity changeCoastal, industrial
Defoamer0.1 – 0.3%Surface foam, pinholesFish-eye craters, recoat failureAll zones
Insulating microspheres5.0 – 15.0% (vol)Negligible thermal benefitFilm weakness, poor burnish resistanceHighveld, semi-arid
Flow improver0.2 – 0.8%Brush marks, poor levellingSilicone contamination, intercoat adhesion lossAll zones

"The science of paint additives is fundamentally a science of balance. Every additive interacts with every other component in the formulation. Optimising one property in isolation almost always creates a trade-off elsewhere — which is why dosage discipline is the single most important skill a formulator or advanced DIY user can develop." — Summarised from paint additive science and applications, ScienceDirect Engineering Topics.

Local brand compatibility — Plascon, Prominent Paints, and imports

A question that South African buyers raise repeatedly — and that most online guides completely ignore — is whether imported additives are compatible with locally produced paint bases. The short answer is: mostly yes, with important caveats.

Plascon product lines

Plascon formulates on both PVA and acrylic resin platforms. Their interior PVA ranges (Plascon Promise, Plascon Nurture) are compatible with most water-soluble HEC thickeners, standard isothiazolinone-based anti-mold additives, and common defoamer packages. What to watch: Plascon's premium acrylic exterior ranges (Plascon Micatex, Plascon Velvaglo) already incorporate proprietary flow improvers. Adding an additional silicone-based flow additive can cause inter-coat adhesion failure. If you need to improve levelling on these products, use a cellulose-ether-based flow modifier at the lowest recommended dosage (0.2%) and test on a small area first.

Prominent Paints and other local manufacturers

Prominent Paints' roof and exterior ranges are generally acrylic latex systems and accept waterproofing additives and UV stabiliser packages well. Their concrete paint products (used widely in Gauteng construction) pair effectively with silane waterproofing additives and anti-rust primers. A point that is easy to overlook: Prominent Paints uses a slightly higher base viscosity in some of its exterior ranges, which means that if you add a thickener, you may overshoot your target KU very quickly. Always add thickeners incrementally — small amounts, stir thoroughly, measure — rather than adding the full calculated dose at once.

Imported additives from European or Asian suppliers (BYK, Evonik, Dow) are chemically sound but may be formulated for paint bases with different pH ranges or solvent profiles. Verify the additive's recommended pH range against your local paint base before purchase. Most South African water-based paints operate at pH 8–9; additives optimised for pH 7 systems may flocculate or lose efficacy. Reference the safer chemical ingredients in coatings database to cross-check any imported ingredient's safety and compatibility profile.

SANS compliance and VOC regulations in 2026

South Africa's regulatory environment for coatings is evolving rapidly. As of 2026, the key standards framework is SANS 10181 (interior paints) and SANS 1586 (exterior architectural coatings), both of which reference VOC (volatile organic compound) limits that directly affect additive selection.

VOC limits and what they mean for additive choice

SANS-aligned VOC limits for interior flat paints currently sit at 50 g/L. Many solvent-borne additives — particularly some flow improvers and defoamers — contribute meaningfully to the total VOC loading of a formulation. In 2026, the shift toward bio-based and low-VOC additive chemistries is no longer merely aspirational; it is increasingly a specification requirement on government contracts, green-star building projects, and school renovations funded through the DHET and DBE. When sourcing additives for compliant projects, request a VOC contribution data sheet from your supplier and add those figures to your formulation's total before sign-off.

Biocide registration requirements

Anti-mold and anti-fungal additives containing active biocides must comply with the Fertilisers, Farm Feeds, Agricultural Remedies and Stock Remedies Act (Act 36 of 1947) when sold as standalone products in South Africa. Practically, this means that any anti-fungal paint treatment you purchase from a local retailer should carry a registration number on its label. If it does not, the product may be non-compliant, and its efficacy claims are unverified. This is a compliance risk that professional contractors should flag during procurement.

DIY troubleshooting — fixing common paint problems with additives

Why do so many DIY paint jobs go wrong even when the painter follows instructions? Often, the answer is not technique — it is formulation. The right additive, added correctly, resolves most common application problems without replacing the paint.

Problem: paint is too thick and difficult to apply

This is the most common query from South African DIY users, particularly in summer when high temperatures accelerate thickening. The instinctive response — adding water — weakens the paint film, reduces opacity, and compromises weather resistance. The correct response is to use a purpose-made flow improver for paint. Add it at 0.2–0.5% by weight, stir for three to five minutes, and allow the formulation to equilibrate for ten minutes before applying. Stir again before use. Do not add water as a substitute.

  1. Measure the paint into a clean mixing container.
  2. Calculate 0.3% by weight of the total paint volume (e.g., for 10 L at approx. 1.4 kg/L, that is approximately 42 g of additive).
  3. Add the flow improver slowly while stirring continuously.
  4. Mix for three to five minutes with a paddle stirrer or drill attachment.
  5. Rest for ten minutes, then stir again before application.
  6. Perform a drawdown test on a scrap board before committing to the full surface.

Problem: mold keeps returning after repainting

Recurring mold after repainting almost always means the substrate was not properly treated before application — not that the paint is defective. The correct sequence is: remove existing mold with a dilute bleach solution (1:4 ratio), allow the surface to dry completely (at least 48 hours in humid conditions), then apply a penetrating anti-fungal paint treatment as a primer coat before the topcoat. Adding an anti-mold paint additive to the topcoat alone, over a contaminated substrate, is ineffective. The contamination will penetrate the film from behind. Of course, there are situations where even correct treatment yields limited results — chronically damp walls driven by structural water ingress need a waterproofing intervention first.

Problem: bubbles and craters appearing in the dry film

Surface bubbling in the wet film that leaves craters after drying is almost always caused by one of two things: excessive foam during application, or silicone contamination from an overdosed flow additive. For foam-related craters, add a defoamer at 0.1–0.2% and avoid vigorous stirring immediately before application. For silicone-related fish-eyes, strip the affected area and restart. Prevent it next time by choosing a silicone-free, cellulose-based flow modifier, especially if you are working with Plascon or Prominent Paints acrylic systems that already contain silicone levelling agents.

Are DIY paint additives in South Africa widely available?

Yes. The availability of DIY paint additives in South Africa has improved substantially since 2023. Builders Warehouse, Leroy Merlin, and independent paint retailers in all major centres now stock a meaningful range of thickeners, mold inhibitors, flow improvers, and waterproofing compounds. Online purchasing through Makro and Takealot has also expanded the accessible range. Pricing is generally in line with or slightly below European equivalent products, partly because the South African distribution chain for construction chemicals has matured significantly.

Frequently asked questions

Common questions answered

Q: What is the difference between a paint additive and a paint modifier?

A: The terms are largely interchangeable in trade usage. Technically, "coating modifiers" often refers to higher-loading materials that alter the fundamental character of the film (such as elastomeric modifiers), while "additives" refers to low-dosage functional chemicals. In practice, South African retailers and suppliers use both terms for the same product category.

Q: Can I add a waterproofing additive to any paint?

A: Most silane and siloxane waterproofing additives are compatible with standard acrylic and PVA water-based paints. They are not recommended for use with lime wash or natural clay paints, as they can interfere with breathability. Always check the additive supplier's compatibility data before blending, and test on a small area first.

Q: How do I choose a roof paint additive for a corrugated metal roof in Durban?

A: For coastal corrugated metal in Durban, prioritise anti-rust paint additives with zinc phosphate or calcium phosphate inhibitors in the primer coat, followed by a UV-stabilised topcoat. An elastomeric flexibiliser is also worth considering to accommodate thermal movement. Salt-resistant acrylic binders perform significantly better than alkyd-based systems in this environment.

Q: Are paint additives regulated in South Africa?

A: Yes, partially. Biocidal additives (anti-mold, anti-fungal) must comply with Act 36 of 1947 and carry a registration number. VOC content is governed under SANS 10181 and SANS 1586 for architectural coatings. Products sold for government or green-rated projects face additional compliance scrutiny. Always request a Safety Data Sheet (SDS) and regulatory compliance certificate from your supplier.

Q: What happens if I use too much anti-mold additive?

A: Exceeding the recommended dosage (typically above 1.5% w/w) does not improve mold resistance proportionally. It can cause the paint to fail SANS VOC limits, raise skin sensitisation risks for applicators, reduce film flexibility, and in some cases cause yellowing of white or pale-tinted coatings. More is never simply better with biocidal additives.

Selecting the right paint additives for your specific South African project requires matching additive chemistry to substrate, climate zone, base paint system, and regulatory context simultaneously. That sounds complex — and it can be — but the framework in this guide breaks the decision into manageable steps. Start with your climate zone, identify your primary performance gap (mold, corrosion, flow, waterproofing, or thermal performance), check compatibility with your chosen Plascon, Prominent Paints, or imported base, confirm VOC and biocide compliance, and then apply the dosage table as your calibration reference. Done in that sequence, choosing and using paint additives becomes a systematic process rather than a guessing game. For deeper technical reading, the paint additives overview on Wikipedia provides a useful starting-point taxonomy of additive chemistries.

TAG:

Request a Quote

We will contact you within one working day. Please pay attention to your email.

SUBMIT